TruTrainer
  • Products
    • Rollers
      • Smartload Power Rollers
      • Classic Rollers
      • Travel Rollers
    • Accessories
      • Front Roller Bumper
      • Platform
      • Front Fork Stand
        • 5mm Quick Release
        • 12mm Thru Axle
        • 15mm Thru Axle
      • Load Release Roller
      • Flywheel Load Roller
      • SmartLoad Upgrade
    • Replacement Parts
      • Roller Belt
      • Flywheel Belt
  • About Us
  • Support
    • Manuals
    • TruTrainer App
    • Firmware (.zip)
  • Warranty
  • Contact Us
  • Products
    • Rollers
      • Smartload Power Rollers
      • Classic Rollers
      • Travel Rollers
    • Accessories
      • Front Roller Bumper
      • Platform
      • Front Fork Stand
        • 5mm Quick Release
        • 12mm Thru Axle
        • 15mm Thru Axle
      • Load Release Roller
      • Flywheel Load Roller
      • SmartLoad Upgrade
    • Replacement Parts
      • Roller Belt
      • Flywheel Belt
  • About Us
  • Support
    • Manuals
    • TruTrainer App
    • Firmware (.zip)
  • Warranty
  • Contact Us
  •

    12mm Thru Axle

     $29.00
    Add to cart
    Quick View
  •

    15mm Thru Axle

     $29.00
    Add to cart
    Quick View
  •

    5mm Quick Release

     $29.00
    Add to cart
    Quick View
  •

    SmartLoad Power Rollers

    8 week backorder

    Due to Covid-19 , Smartload Rollers are shipping 1-2 weeks from receipt of order. Thank you for your patience.

    $1,699.00
    Add to cart
    Quick View
  •

    Classic Rollers


    If you purchased a set of Classic rollers while the SmartLoad is on back order, we will offer a special SmartLoad upgrade discount so that the Classic plus SmartLoad Roller upgrade cost is the same as the SmartLoad Power roller list price.

    $999.00
    Add to cart
    Quick View
  •

    Travel Rollers

     $849.00
    Add to cart
    Quick View
  •

    Front Roller Bumper

     $139.00
    Add to cart
    Quick View
  •

    Platform

     $179.00
    Add to cart
    Quick View
  •

    Front Fork Stand

    Please choose a wheel hub size. If you would like an additional size, please choose from below.

    $159.00
    Select options
    Quick View
  •

    Load Release Roller

     $119.00
    Add to cart
    Quick View
  •

    Flywheel Load Roller

     $299.00
    Add to cart
    Quick View
  •

    SmartLoad Power Roller Upgrade

    8 week backorder

    Due to Covid-19, SmartLoad Power Roller Upgrade are shipping 1-2 weeks from receipt of order. Thank you for your patience.

    $899.00
    Add to cart
    Quick View
  • 1
  • 2
  • Load More...

CycleDyne LLC

P.O. Box 385
Brownsburg, IN 46112-385

Email: info@trutrainer.com

Menu

Products

About Us

Manuals

Warranty

Privacy Policy

Shipping Policy

Drop Us a Line




    © Copyright 2019. All Rights Reserved.

    2012 Front Fork Stand and Rail Bumpers Beta Release

    We received some requests from owners wanting to do massive sprint intervals without worrying about coming off the rollers. So we went to the drawing board and come up with a front fork mount and rail bumpers that we beta released for testing. We do not offer them for sale through our web site, but will provide them as special order items if you contact us.

    TruTrainer Premium Bicycle Rollers are engineered to bring the road to you anytime anywhere. We hope you experience the difference!

    2009 Manufacturing In Source

    To make it easier to to provide the quality that we demand, we in sourced all of our manufacturing. No easy task, since we had to reconfigure our shop so that we could bring in our own CNC equipment. A lot of effort but the results are worth it. We owe a big thanks to the Hurco Machine Tool guys who are headquartered in Indianapolis for helping us get started. Our Hurco TM6 lathe and VM10 mill are pictured below.

    2011 Manually Adjustable Auxiliary Load Device Beta Release

    In order to satisfy owners who have been clamoring for more load. We released a beta auxiliary load bar to low rate production. We do not advertise this on our web site, but do sell it for $79.95 to those who contact us. Picture below is the load bar and manual adjustment mechanism.

    The load bar that bolts onto the frame behind the middle roller. It uses the tapped holes pre-installed for the belt guard so the installation is fairly easy. it has four load positions from no load to full load. In the latter position, at 20 miles per hour the manual auxiliary device adds 200 watts of resistance. So high torque low RPM workouts in the 52×11 gear are possible. If you are interested, give us a shout and we’ll get back to you.

    2010 Production Capacity Increases

    This year we focused on fine tuning our production systems so that we could keep up with demand without sacrificing quality. We think we were successful in provide the service levels our customers have come to expect even though we burned allot of midnight oil getting our production line humming. Most of our efforts revolved around creating the CNC machine tool programs along with requisite tooling and fixtures needed to produce our parts. We managed to increased our production capacity by eliminating setup time and increased part quality by designing and making precision fixtures to hold our parts while they are machined. This left little time to sort out the wireless auxiliary load system; and allot of work remains to sort out the ANT compliant electronics.

    2008 Auxiliary Load System Begins Development

    This year we began development of a wireless auxiliary load device that will allow you to get rid of your stationary trainers. The auxiliary load device is contained within the middle roller and is simple drop in retrofit that will allow hill climb load simulation. Our test results show that it will boost the existing load allowing 500 watts at 50 RPM in a 53×12 gear. Our plan was to begin marketing the auxiliary load device in the fall but issues with battery life and dependability with the electronics package have delayed us. The mechanicals are finished and the results of the testing of the production units are shown below. We are re-doing the electronics and moving to an ANT compliant system so that we will be compatible with your gizmos.

    2006 First European Sale

    The challenge of our second year was keeping up with sales. Word of our rollers was getting out thanks to some great reviews from Fixed Gear Fever, Pez Cycling News and NYVeloCity. Even people as far away as the UK were buying them and the compliments from the customers kept rolling in.

    2007 Travelers Introduced Q3

    Now that our supply chain was set we decided to release the traveler version of our rollers. these are a light weight version of the TruTrainer without the rear flywheel and are targeted at the fixed gear guys who carry allot of gear to and from the velodrome. We also began marketing an upgrade kit to add the flywheel option for those who purchased travelers.

    2005 CycleDyne LLC Formed

    This was a hectic year for us and things did not always go according to plan.  We wanted to have the production line up and running by August so that we would have plenty of time to market our rollers prior to fall-winter sales season.  In late July, without advanced notice, our supplier of machined components backed out because they could not hold the aerospace tolerances that we had specified.  Needless to say we burned a lot of midnight oil scrambling to recover for our first sales season. We were very happy with our first year, because the response from customers and reviewers has been overwhelmingly positive.  Many customers tell us that they can’t stand to go back to their regular trainers or rollers.